by Jim Beights | May 27, 2015
What the hell is a torque cone you may ask? What flavors are available? Samson stainless steel Torque Cone are a bolt-in device that increases outgoing exhaust velocity, while at the same time preventing exhaust gas reversion. All dual exhaust-pipe exhaust systems...
by Jim Beights | May 26, 2015
For 1986 to 2011 Harley-Davidson Softail model Motorcycles, 2006 and earlier non fuel injection models require O2 sensor plugs (purchased separately part no. A-164). Also fits 2012-2014 with Drag Specialties Part# DS-1861-0594 18mm to 12mm O2 Sensor Adapter. This is...
by Jim Beights | May 25, 2015
If you plan on attending the 75th Sturgis Motorcycle Rally in Sturgis South Dakota stop by the Samson Exhaust manufacturing facility and meet the Godfather of Exhaust Pipe Kenny Price!! Samson is located in the Sturgis Industrial Park at 1151 Industry Road, Sturgis,...
by Jim Beights | May 23, 2015
Samson’s precision made O2 sensor plugs (One pair), are compatible with all Harley Motorcycle exhaust systems. The plugs fits the 18mm sensor bung in 2007 and later exhaust pipes when the sensors are not being used. These plug can also be used on 2007 and later pipe...
by Jim Beights | May 22, 2015
Is your 2009 Harley-Davidson Bagger needing a performance shot-in-the-arm? Bolt on a Samson exhaust system for some added ponies. A little horsepower increase will put a smile on any Bagger riders face. Samon’s Legend Series FL3-901 Cannons look as good as they...
by Jim Beights | May 21, 2015
When installing a new exhaust header pipe or simply re-installing the existing pipe after temporary removal, it is strongly recommended that the crushable composite-metal exhaust gasket be replaced. Samson tapered radius exhaust gaskets makes it easy to install...
by Jim Beights | May 20, 2015
Nick Clark posted a picture of his bike equipped with Samson Cholos and we couldn’t resist bragging about it on the site. Find a set of your own here. Would you like us to show off your Samson equipped motorcycle? Send us an email or post on our facebook page....
by Jim Beights | May 20, 2015
Hi Strength Flanges Replace OEM Items! Whenever an exhaust system swap is made, it is highly recommended that new exhaust flanges and exhaust clips be used to ensure the best seal possible at the exhaust port. If you’re spending good money on an exhaust system, new...